Wireless ID Box

Wireless ID Box

The Wireless ID Box controller allows you to implemente simple and enconomical access control solutions.

As the ID Box communicates wirelessly with the modules, the implementation process is largely simplified since it's unnecessary the use of communication cables in the installation process. There is only need to exist a power source.

Equipped with a wireless antenna that operates at a 2.4 GHz frequency, the ID Box can communicate with:

  • - Wireless Bio Module – with fingerprints reader;
  • - Wireless RFID 125 kHz Module – RFID 125 kHz card reader;
  • - Wireless RFID Mifare Module – RFID 13.56 MHz card reader;
  • - Wireless Keypad Module – keypad for password typing;
  • - Wireless Chip Card Module – chip card reader.

Each ID Box can control up to 4 modules. To ensure the communication and the internal access system security, the modules are paired with their ID's Box.

In the ID Box can be registered a maximum limit of 500 users and 2000 fingerprints.

This controller has two relays to open doors or triggering alarms. It also has 2 digital inputs to link a button to open doors or an open door sensor.

Regarding the access control itself the ID Box have various features and options:

  • - Ability to control a door with two modules;
  • - Control two doors or four doors, having a module on each door;
  • - Control 1 door with a module on each side;
  • - Control 2 doors with a module on each side;
  • - Control double doors, ie two doors, each having two modules.

With the ID Box, you can collect fingerprints and copy them to other modules that are controlled by the same ID Box.

The door opening times with latches or electric locks are configurable. There is also the option to trigger an alarm if someone violates a module, secure the access to the ID Box configuration menu with a password, choose the RF channel in which it operates (100 channels available) and more.

The ID Box can then be used to control access to restricted areas, together with Acronym's modules.

It is certainly a simple, economical and viable solution for a secure access control.

  • ID Box 1
  • ID Box 2
  • ID Box 3
  • ID Box 4
  • ID Box 5
  • ID Box 6
  • ID Box 7

Features:

  • - Easy installation;
  • - 2.4 GHz wireless radio - allows the communication with the modules without the need for a cable;
  • - Speed: 1.0 Mbps;
  • - Infrared remote control – to configure the ID Box;
  • - Internal memory that can store up to 500 records and 2000 fingerprints;
  • - 2 relays: opening doors and alarms;
  • - 2 digital inputs: button to open the door and open door sensor;
  • - Graphic display indicating the status of operations;
  • - Power source with wide tolerance - between 7 to 32V;
  • - Infrared receiver - for infrared instructions/commands;
  • - Management and control of all Acronym's Wireless Modules.